New Holden Red motor 6cyl 330 Holley Carburettor Conversion Kit (Economic/Street Use)
Brand new Holley 2 Barrel 330cfm carburettor designed and manufactured in Australia to suit the Holden Red Motor 6 Cylinder engines. Carb is sized at 330cfm with annular boosters fitted for improved atomisation at low air speed and bottom end torque. Metering block re-calibrated: main, power and pump circuits to suit the 6cyl engine to maximize fuel economy. This carb is designed and engineered for 6cylinder use. We have had various Red Motors dyno tuned to a close figure that will suit a standard Red Motor, regardless of capacity. This helps us provide the right calibration settings for optimum efficiency provided the ignition system is working correctly (points set correctly, timing set as instructed, vac advance working correctly). We supply electronic conversions and Vacuum Advance cans if needed. For more modified engines, the kit will still work fine however fine tuning can be done to better optimize your engines performance.
(THIS IS NOT A 350 V8 STREET CARBURETTOR)
The air filter is a chrome 9" x 2" high sports type.
The bowl assembly features an aluminium construction and presents well. The metal is easily polished and has significant defense against corrosion, unlike the new shiny metal Holley Avenger series which is simply the bare metal without a coating. The bowl also features the classic Holley fuel bowl "window", now facing away from the engine! This makes it far easier to check the fuel bowl internals without having to lean directly over a hot engine.
Furthermore the fuel inlet has been moved away from the tappet cover, and the heat surrounding it.
Our workshop line is open business hour for assistance fitting should you need it.
The carburettor is supplied with choice of no choke, manual choke , or electric choke.
The kit also includes a brand new Redline manifold, Australian made.
We also sell the 350 Holley that was used in oldschool Motorsport. For more serious motorsport we have the 460CFM 2brl Holley. Contact us.
Warranty
Recarb warranties both its new and reconditioned carburetors as well as it’s re-manufactured carburetors, to be free from defects in material and workmanship for a period of one year from date of purchase.
This warranty specifically does not apply to products which have been
· Modified
· Subjected to adverse conditions such as misuse, neglect, accident, improper installation or adjustment, dirt, water, other contaminants or faulty repair.
This warranty is extended to the original consumer only.
In the event of an alleged defect, RECARBs responsibility is strictly limited to repair or replace the defective product. RECARB will have the sole discretion for final warranty determination. RECARB shall not be responsible for: other labour, transportation or other incidental charges, consequential or other damages incurred by use of any RECARB product. Products returned are to have freight pre-paid.
A note on warranty: Problems happen. We all wish to solve them as easily as possible. Most problems are solved with a simple PH call, and our quick inspection.
