New GENUINE WEBER 44 IDF Quad Carburettor Carby Set suit Chevrolet 350 Chev V8
This is a full quad carburettor conversion kit to suit Chevy 350 CI Small Block V8 motors. An ideal setup if you do not want to go for the expensive 48 IDA route.
The carbs used are Genuine Weber 44 IDF's, an perfect size if you want the looks of a Quad Carburettor setup but not sacrificing low speed street driveability. Of course, you will still be able to achieve exhilarating acceleration rates and ultimate power from your motor.
Australian made, this new Redline manifold is one of the highest quality manifolds produced today.
Unlike Holley carburettors, Webers offer a full range of tuning with every tuning component able to be changed for a different setting. For instance, when you buy a Holley, you are stuck with the one venturi size and unable to deviate from that unless you buy another carburettor. Weber allows you to experiment with different Venturi sizes as well as the following:
- -Choke Venturis
- -Booster Venturis
- -Main Jets
- -Air Jets
- -Emulsion Tubes
- -Idle Jets
- -Pump Jet
- -Needle Valve Size
A multitude of tuning areas that you just cannot do easily with most other brands of carburettors.
Know that you're buying a genuine Carburettor. See in our gallery for the photo that outlines where to tell if the carburettor is Genuine or not.
We Hand Prepare these carburettors, making sure that the following are set:
- -Float levels to Weber Standard
- -Throttle Butterflies are aligned and moving freely
- -Mixture screws are set to a standard stetting
- -Idle Speed screw is set to a standard setting
- -Idle Air Bleed screws are set to zero
These are done so that we know you are getting a product that is more likely to bolt on and run for you without any hassle.
Linkages are included, We include Hex-rod linkages for zero risk of linkages slipping and causing the carburettors to go our of balance.
You will need to fit a fuel pressure regulator to this set as these carbs cannot run with fuel pressure higher than 3psi. See options above.
The kit comes with the following:
- 1x New Redline Intake Manifold
- 4x New 44 IDF Genuine Weber Carburettors
- 1x Hex Rod Linkage kit
- 1x Mounting Hardware and Gaskets
- 1x 1M fuel line to connect all carbs to one fuel line
PLEASE BE AWARE ALL CARBURETTORS REQUIRE PREPARATION AND/OR ASSEMBLY, THIS WILL TAKE 2-4 DAYS
CONTACT US FOR MORE EXPRESS SHIPPING OPTIONS!