BMW M30 6Cyl CHAIN DRIVE GENUINE Triple WEBER 40 DCOE Side-draft Carburettor Kit
This is a set of brand new Triple 40 DCOE Weber carburettors to suit the BMW M30 6 Cyl CHAIN DRIVE engines. This is an aggressive upgrade suitable for both sport/race/rally applications. This is a popular set-up and has proven successful in decades of motor sport.
Included is the following:
- - 3x New 40 DCOE Weber carburettors
- - New manifold suit BMW M30 CHAIN DRIVE 6 CYLINDER Motors
- - Overhead Hex-Rod Linkage set
- - Ram Tubes
- - 2x 'T' Piece Banjo Inlets & 1x 90* Elbow Inlet
The carburettors are all thoroughly checked over before sending. The carbs are not pre-jetted however, baseline jetting can be arranged at an extra cost.
The linkage kit utilizes a hex rod linkage bar, meaning no slippage and a more consistent balance and tune. We supply you all the linkage components to allow you to mount your factory Throttle cable on, a return spring etc. You will need to make a throttle cable bracket.
We supply you with the appropriate fuel inlets so that you do not need a fuel block to split into 3. We also hard mount the carburettors onto the manifold to help with future maintenance with Balancing and Tuning. If you prefer soft mounts, please contact us to arrange this. We supply you with the needed studs, nuts, gaskets etc to bolt carbs onto the manifold.
Triple carb setups gives your engine the ultimate opportunity of making full horsepower without any means of forced induction. Not only will you get to hear a sweet induction noise, your engine will accelerate at a quicker rate making it perfect for Sports/ Motorsports driving.
We can help you with jetting and tuning. You must contact us first for this offer.
PLEASE BE AWARE ALL CARBURETTORS REQUIRE PREPARATION AND/OR ASSEMBLY, THIS WILL TAKE 2-4 DAYS
CONTACT US FOR MORE EXPRESS SHIPPING OPTIONS!